News

IMS Deltamatic becomes IMS TECHNOLOGIES
22-05-2018

A new name which signs a new development phase within Coeclerici Group, with a focus on a technology



IMS Deltamatic S.p.A. opens new 9,000 sqm production site in Italy
08-11-2017

Calcinate, September 2017 – IMS Deltamatic Group has recently started the production in its new, state-of-the-art manufacturing plant in Seriate, Italy.



IMS Deltamatic S.p.A. kicks off a new development phase
21-12-2016

Coeclerici S.p.A. invests in the Group and becomes majority shareholder



Case History MMC-HITACHI Tool and Delta Moulds
26-10-2015

The added value of the process optimization



Master in Mechatronics & Management – MEMA
24-04-2015

IMS Deltamatic and LIUC – Università Cattaneo, in partnership with other leading companies, promote the fourth edition of the 2nd level Master Degree in Mechatronics & Management - MEMA.



Change in Top Management of IMS Deltamatic Group. Daniele Vaglietti becomes CEO
01-01-2015

1st January 2015. IMS Deltamatic S.P.A. announces that Daniele Vaglietti will take a new role as CEO/Managing Director of IMS Deltamatic Group.



Ims Deltamatic acquires a new Hermle C50
29-10-2014

Ims Deltamatic acquires a new Hermle C50, a highly dynamic machining center designed with 5-axis/5-side machining in mind.



Change in management at GOEBEL Schneid- und Wickelsysteme GmbH
01-08-2014

Roberta Ghilardi takes over as interim CEO



IMS Deltamatic ready to go shopping looks at Europe and Usa
18-07-2014

A un anno dall’acquisizione di Goebel Schneid und Wickelsysteme, IMS Deltamatic manifesta la volontà di continuare la strategia delle acquisizioni e si dice pronta a fare shopping in Europa e in Usa.



The growth of IMS Deltamatic goes for other acquisitions
25-06-2014

A year ago the entrance to the German Goebel, born in 1851.



European BBQ Championship 2014 in Poland supported by Europe’s aluminium industry
06-06-2014

The European BBQ Championship will take place 20-21 June at the Charlotta Valley Resort and Spa on the Polish Baltic Sea coast and will be supported by the European aluminium industry.



IMS DELTAMATIC acquires a MAZAK HORIZONTAL CENTER NEXUS 8800-II
03-06-2014

IMS DELTAMATIC acquires a MAZAK HORIZONTAL CENTER NEXUS 8800-II, new Generation World-Class Horizontal Machining Center, designed for high productivity and high accuracy.



IMS DELTAMATIC and the LIUC
28-05-2014

Università Cattaneo, in partnership with some leading industries, promotes the third edition of the 2nd level Master Degree in Mechatronics & Management - MEMA, offering 15 scholarships.



IMS Deltamatic S.p.A. opens new 9,000 sqm production site in Italy
08-11-2017

Calcinate, September 2017 – IMS Deltamatic Group has recently started the production in its new, state-of-the-art manufacturing plant in Seriate, Italy.

Due to exponential increases in demand across all brands, IMS Deltamatic S.p.A. expanded its production with the new 9,000 sqm manufacturing facility in order to offer its customers the highest quality from one source. The new production plant at Seriate is located close to the headquarters of IMS Deltamatic S.p.A., which also operates a manufacturing site in Bergamo. “This move has been very ambitious and posed a challenge to all members of the IMS Deltamatic Group due to its sheer magnitude and complexity. Nonetheless, the Seriate production site is the next strategic step towards a successful future”, states Daniele Vaglietti, CEO of IMS Deltamatic S.p.A.



The new Seriate site houses the manufacturing of moulds as well as various small and big parts for GOEBEL IMS, ROTOMAC, DELTAMATIC and KASPER. This includes unwinding blocks and arms, winding stations and arms, machine bases and frames, milling, welded components and complete machine parts. In addition, it hosts the Mould Division of the group which has grown over 30 percent in turnover since 2015. Deltamould is the key supplier to the world leaders in the production of braking systems and components for cars, motorbikes, industrial vehicles and machinery. It supplies steel moulds such as gravity moulds, low pressure moulds, core boxes and die castings for its customers. 

The move to the new Seriate production site started in April 2017 after the acquisition of the industrial property. Since then, all buildings have been fully renovated, including reinforced floors, new wall and ceiling tiles and a complete eternit roof removal. Investments were made in new electrical systems, compressors, air conditioning systems, network-systems-data, new servers and telephony-optic-fiber-wifi. The objective: Creating a highly efficient, cutting-edge production facility that fulfills all requirements concerning optimized work processes, modern workspaces, occupational safety and sustainability.



The Seriate manufacturing site with its 60 employees now houses different machining areas, a modern logistics and storage center, up-to-date workplaces and meeting rooms. Over 40 high-performance machines are installed, such as the prestigious Swiss 5-axis working center Mikron HPM 1850 U. The machine equipment from Hermle, Mikron, Mazak, Alesamonti, Soraluce, DMG Mori and Doosan includes among others state-of-the-art CNC machines, boring machines, lathes, turning centers, welding and carpentry, as well as different milling centers to deliver the highest flexibility and precision for finishing machining results. Thanks to more than a dozen new cranes with capacities of up to 32 tons each, a significantly greater loading volume is achieved. To ensure highest quality, a control department applies scanning for the dimensional inspection of machine parts rapidly digitizing millions of data points.



To further optimize production processes, cutting-edge software, such as Autodesk’s CAM solutions, plays an integral role at the new Seriate site. It enables the engineering department not only to fully meet the specific requirements of its customers but also to guarantee a seamless supply chain and reliable just-in-time production according to markets’ needs. Continuous investments in technology, training and a close-knit team structure are key to provide outstanding service in terms of reliability, coherence and results to the customers of the IMS Deltamatic Group. 



“With our new production facilities, we can now capitalize on synergies between our business units. Through efficient allocation of skills and resources and optimized use of our machinery, e.g. mechanics parts at daytime and moulds at nighttime, we can offer outstanding quality and highest performance at the same time. With this increase in production capacity, we are expecting to expand our customer portfolio”, further explains Daniele Vaglietti. Thanks to an extensive floor space and storage capacity, the Seriate site not only enables a highly efficient production process today but also offers space for further strategic growth of the IMS Deltamatic Group in the future. 

The IMS Deltamatic Group with more than 320 employees and an expected turnover of € 70 million in 2017 operates four manufacturing facilities in Italy, Germany, and the U.S. 

Watch the video about Seriate



IMS Deltamatic S.p.A. opens new 9,000 sqm production site in Italy
08-11-2017

Calcinate, September 2017 – IMS Deltamatic Group has recently started the production in its new, state-of-the-art manufacturing plant in Seriate, Italy.

Due to exponential increases in demand across all brands, IMS Deltamatic S.p.A. expanded its production with the new 9,000 sqm manufacturing facility in order to offer its customers the highest quality from one source. The new production plant at Seriate is located close to the headquarters of IMS Deltamatic S.p.A., which also operates a manufacturing site in Bergamo. “This move has been very ambitious and posed a challenge to all members of the IMS Deltamatic Group due to its sheer magnitude and complexity. Nonetheless, the Seriate production site is the next strategic step towards a successful future”, states Daniele Vaglietti, CEO of IMS Deltamatic S.p.A.



The new Seriate site houses the manufacturing of moulds as well as various small and big parts for GOEBEL IMS, ROTOMAC, DELTAMATIC and KASPER. This includes unwinding blocks and arms, winding stations and arms, machine bases and frames, milling, welded components and complete machine parts. In addition, it hosts the Mould Division of the group which has grown over 30 percent in turnover since 2015. Deltamould is the key supplier to the world leaders in the production of braking systems and components for cars, motorbikes, industrial vehicles and machinery. It supplies steel moulds such as gravity moulds, low pressure moulds, core boxes and die castings for its customers. 

The move to the new Seriate production site started in April 2017 after the acquisition of the industrial property. Since then, all buildings have been fully renovated, including reinforced floors, new wall and ceiling tiles and a complete eternit roof removal. Investments were made in new electrical systems, compressors, air conditioning systems, network-systems-data, new servers and telephony-optic-fiber-wifi. The objective: Creating a highly efficient, cutting-edge production facility that fulfills all requirements concerning optimized work processes, modern workspaces, occupational safety and sustainability.



The Seriate manufacturing site with its 60 employees now houses different machining areas, a modern logistics and storage center, up-to-date workplaces and meeting rooms. Over 40 high-performance machines are installed, such as the prestigious Swiss 5-axis working center Mikron HPM 1850 U. The machine equipment from Hermle, Mikron, Mazak, Alesamonti, Soraluce, DMG Mori and Doosan includes among others state-of-the-art CNC machines, boring machines, lathes, turning centers, welding and carpentry, as well as different milling centers to deliver the highest flexibility and precision for finishing machining results. Thanks to more than a dozen new cranes with capacities of up to 32 tons each, a significantly greater loading volume is achieved. To ensure highest quality, a control department applies scanning for the dimensional inspection of machine parts rapidly digitizing millions of data points.



To further optimize production processes, cutting-edge software, such as Autodesk’s CAM solutions, plays an integral role at the new Seriate site. It enables the engineering department not only to fully meet the specific requirements of its customers but also to guarantee a seamless supply chain and reliable just-in-time production according to markets’ needs. Continuous investments in technology, training and a close-knit team structure are key to provide outstanding service in terms of reliability, coherence and results to the customers of the IMS Deltamatic Group. 



“With our new production facilities, we can now capitalize on synergies between our business units. Through efficient allocation of skills and resources and optimized use of our machinery, e.g. mechanics parts at daytime and moulds at nighttime, we can offer outstanding quality and highest performance at the same time. With this increase in production capacity, we are expecting to expand our customer portfolio”, further explains Daniele Vaglietti. Thanks to an extensive floor space and storage capacity, the Seriate site not only enables a highly efficient production process today but also offers space for further strategic growth of the IMS Deltamatic Group in the future. 

The IMS Deltamatic Group with more than 320 employees and an expected turnover of € 70 million in 2017 operates four manufacturing facilities in Italy, Germany, and the U.S. 

Watch the video about Seriate